How To Clean A Laptop Cooling Pad: 2022 Ultimate Guide

If you use your best laptop on a regular basis, then it’s important to keep the cooling pad clean.

Not only will this help your laptop run cooler and more efficiently, but it can also extend the life of the cooling pad itself.

In this guide, we will walk you through the process of how to clean a laptop cooling pad step-by-step.

We’ll cover everything from removing dust and debris buildup to deep cleaning stubborn stains.
So whether your cooling pad is dirty from everyday use or needs a more thorough cleaning, follow these steps and get it done.

Table of Contents

Step one: Gather your Supplies

The supplies for cleaning a laptop cooling pad is very limited.

You’ll need a soft cloth, some distilled water (or laptop cleaner), and maybe a toothbrush if there’s stubborn dirt buildup.

Make sure to use distilled water so that you don’t damage the cooling pad with tap water.
Caution! the water will not be used on the circuit rather on the plastic/metallic areas

Step two: Open the laptop cooling pad

How to Clean a Laptop Cooling Pad | Step three: Clean the cooling fins

Now you will have to open the cooling and disassemble it.
For this, you will need a small screwdriver. Be careful not to lose any of the screws.

Step three: Use Compressed Air

Now before doing anything else, it’s a good idea to clean out any dust or debris that may have built up inside the cooling pad.

You can do this by using compressed air. Simply spray the air into all of the openings and crevices until it’s clear.

Step four: Remove Debris with a Toothbrush or soft brush

If there’s any stubborn dirt or debris that the compressed air didn’t remove, then you can try using a toothbrush.

Dip the toothbrush in some distilled water and lightly scrub at the dirt until it comes off.
Be sure to rinse the toothbrush often so that you don’t damage the cooling pad with too much water.

Step three: Clean the cooling fins

The next step is to clean the cooling fins.

You can do this by using a soft brush or your fingers to gently remove any dust or debris that may be clinging to them.

Step four: Dry the cooling pad

Once you’ve cleaned all of the dirt and debris from the cooling pad, it’s important to dry it off completely.
You can do this by using a clean, dry cloth or compressed air.
Make sure that there are no wet areas remaining before moving on to the next step.

Step five: Apply Laptop Cleaner

Now it’s time to apply the laptop cleaner.

This will help to ensure that your cooling pad stays clean and free of dust and debris.
Simply spray a small amount of cleaner onto the cloth and then wipe down the entire surface of the cooling pad.

Allow it to dry completely before putting it back together.
And that’s it! You’ve now successfully cleaned your laptop cooling pad.

Be sure to follow these steps on a regular basis to keep your cooling pad in good condition and help your laptop run cooler and more efficiently.

Tips for keeping a clean laptop cooling pad:

Clean your laptop cooling pad regularly with a wet cloth
Use a vacuum cleaner to remove any dust or dirt from the cooling fins
Apply a small amount of vegetable oil to the fan blades every few months to keep them running smoothly
If the cooling pad starts making strange noises, take it apart and clean all the parts with a brush or compressed air
Store your laptop cooling pad in a dry place when not in use

By following these simple tips, you can help extend the life of your laptop’s cooling pad and keep it in good condition.

Cleaning a laptop cooling pad is a simple process that only takes a few minutes.

So don’t wait until it’s too late, make sure to clean your cooling pad on a regular basis.

Do you have any tips for cleaning a laptop cooling pad that we didn’t mention? Let us know in the comments below.

Can you wash a cooling pad?

The answer is no if you mean washing it will lots of water. You should be able to clean it using a damp cloth though.

Where circuits are involved you have to use compressed air to blow dust and dirt away.

If you have a laptop cooling pad that is detachable, take it apart and clean every nook and cranny.

Use a toothbrush if needed. You can also wash the fabric cover using warm water and a mild detergent but make sure to air dry it completely before putting it back on the cooling pad.

Use a vacuum cleaner with the hose attachment to suck up any dust and dirt that is hiding in between the cooling pad’s slats.

You can also use a small paintbrush to get into tight spaces.

If you have a metal laptop cooling pad, it is best to clean it using a dry cloth. If there are any stubborn stains, you can use a mild soap and water solution.

However, make sure to rinse it off with clean water and dry it completely before using it again. (you must remove all the circuits, fan and any wires to avoid being damaged by the use of water)

Conclusion on how to clean a laptop cooling pad

In conclusion, a laptop cooling pad is an important part of your computer set-up and should be kept clean to ensure optimal performance.

By following these simple steps, you can keep your cooling pad free from dirt, dust, and other debris that can cause overheating and shorten the life of your computer.

Related articles:

How to Clean a Laptop Cooling Pad: 2022 Ultimate Guide